DAP Odin S-218A
De gewenste looptijd selecteert u bij het indienen van uw aanvraag.
The DAP Odin S-218A is an extra bold, heavy weight Ultra Subwoofer suitable for medium to big crowds. It produces an awesome wall of sound with a frequency response as low as 28 Hz for an extremely low bass. The internal high-power 4 kW Class D amplifier has a peak output power of 10,000 watts. The subwoofer is intended to be used in combination with T-8(A) Line Array Satellites for a super punchy full-range sound.
The Odin S-218A is equipped with two 18″ Celestion Ferrite Magnet subwoofers containing 5″ voice coils producing up to a staggering 141 dB SPL at 1 meter distance. The DSP settings are configurable to make sure that the S-218A delivers under any circumstance and in any setup.
Several DSP presets are available, including preset for “Cardioid” and “End Fire” mode. A great addition to the T-8(A) Satellite and S-18(A) Subwoofer to literally bring more punch and depth to your live shows.
With the Odin Active loudspeakers, the free Odin Editor software, in combination with the CL-4 Connect, allows you to freely adjust the EQ, gain and delay per speaker or per group of speakers from a Windows PC/laptop. It also allows you to monitor live information from each speaker, such as amplifier temperature and high/low output. In addition, EASE Focus 3 software can be used to calculate the splay angle and “Throw”. A plug-in has been developed for adding our speakers to its database.
Please note that powerCON and network cables are not included but are to be ordered separately.
Outputs
Low Driver Power
1600 W
Power Amplifier RMS Output
4000 W
Power Amplifier Peak Output
10000 W
Main Outputs
1
Main Output Connector
3-pin XLR
Inputs
Mono Inputs
1
Mono Input Connector
3-pin XLR
Audio Specifications
THD Level %
< 0.5 %
Signal-to-noise Ratio
> 90 dB
AD/DA Convertor Sample Rate
48 kHz
Amp Technology
Class D
Damping Factor
200 :1
Speaker System
Subwoofer
Speaker Sensitivity (1 W/1 m)
101 dB
Speaker Impedance
8 Ω
Maximum SPL at 1 m
141 dB
DSP Processor Bitrate
32-bit
Frequency Response Minimum
28 Hz
Frequency Response Maximum
110 Hz
Frequency Response (-6 dB) Minimum
28 Hz
Frequency Response (-6 dB) Maximum
110 Hz
Crossover Frequency (Low)
25 Hz
Crossover Frequency (High)
90 Hz
Woofer Diameter
18 “
Woofer Voice Coil Diameter
5 “
Woofer Magnet Type
Ferrite
Subwoofer Dispersion Angle (Horizontal)
360 °
Subwoofer Dispersion Angle (Vertical)
180 °
Sound Editing
Equalizer Gain Range
30 dB
Parametric Output Equalizer
8 Bands
Crossover Filter Types
Butterworth
Crossover Slopes
24 dB
Phase Reverse
Yes
Internal Storage
User Presets
Yes
User Presets Capacity
10
Control and Programming
Control Mode
PC Software, Stand Alone
Electrical Specifications and Connections
Power Supply
100-240 V AC 50/60 Hz
Power Consumption
3100 W
Fuse
6.3 A
Power Connector In
powerCON Blue
Power Connector Out
powerCON Grey
Data Connector In
etherCON
Data Connector Out
etherCON
Mechanical Specifications
Amplifier Cooling
Axial fan
Height (mm)
665 mm (26.181″)
Width (mm)
1400 mm (55.118″)
Depth (mm)
635 mm (25″)
Material
Plywood
Material Thickness
18 mm (0.709″)
Colour
Black
Finish
Painted
Weight
115.5 kg (254.634 lb)
IP Rating
IP20 (indoor use only)
Product Properties
Pole Mount
M20
Electronic Protection
Convection-fan, Digital limiter, Overload, Thermal
LED Indicators
Clip, Data connect, Power, Protect, Signal
Speaker Grille Material
Steel
Speaker Handle Positions
Left side, Right side
Castors
Optional
Rigging
Rigging Options
Stacking
Included Items
Included Cables
None
Included Rigging
None
